Motorised Bendable Curved Curtain Tracks
Motorised Bendable Curved Curtain Tracks
Our iSmart Window curtain track can be bent to any angle from 90 to 180 degrees on a 200mm radius former. Our new motorised bendable curved curtain track is different from the normal 90 degrees L shape or U shape or 135 degrees curved curtain tracks which we use 90 degrees or 135 degrees connection devices, these connection devices are normally used for customers outside Auckland areas due to courier company's parcel sizes restriction. We will use the digital angle control bending machine to bend our curtain tracks into the most radius of irregularly curved tracks to meet your specific requirements or a project. Templates might be required for us .
Since our motorised bendable curved curtain tracks are very smooth, you can use not only the pencil pleated curtains but also the single, double or triple pleats curtains on our motorised bendable curved curtain tracks. the only requirement is the space between the two pleats should not be wider apart than 100mm.
Both the pleated curtain heading style and S-Fold / Wave-Fold heading style curtains can be used on our motorised bendable curved curtain tracks.
If you want to install the motorised curved curtain tracks inside the pelmet, you will need at least 150mm space inside the pelmet for the single motorised curved curtain track, and 280mm space inside the pelmet for the double motorised curved curtain track.