Our iSmart Window curtain track can be bent to any angle from 90 to 180 degrees on a 200mm radius former by our bending machine. Our new motorised curved curtain track differs from the normal 90-degree L-shaped, U-shaped, or 135-degree curved curtain tracks, which use 90-degree or 135-degree connection devices. These connection devices are normally used for customers outside the Auckland area due to the courier company's parcel size restrictions.
We will use the digital angle control bending machine to bend our curtain tracks into the most radius of irregularly curved tracks to meet your specific requirements or a project. Templates might be required for us to form the shape for those Clients outside Auckland accurately.
Since our motorised bending curved curtain tracks are very smooth, you can use not only the pencil pleated curtains but also the single, double or triple pleat curtains on our motorised bendable curved curtain tracks. The only requirement is that the space between the two pleats should not be wider apart than 100mm.
Both the pleated curtain heading style and the S-Fold / Wave-Fold heading style curtains can be used on our motorised bendable curved curtain tracks.
If you want to install the motorised curved curtain tracks inside the pelmet, you will need at least 150mm space inside the pelmet for the single motorised curved curtain track, and 280mm space inside the pelmet for the double motorised curved curtain track.
