WIFI Bridge (Connector) DD7002B

As our most of curtain motors and tubular motors contain built in 433MHz RF receiver, as you know we usually use the Broadlink RM PRO hub to control the motor remotely or set the timing to control via download e-control app to your smartphone or tablet, the disadvantage of Broadlink RM Pro Hub is if you want to voice control the motor via Amazon Alexa or Google Home, then you only can use the Android smart devices, you can't use the iphone or ipad, meanwhile the communication between the Broadlink Hub and the motor is one way not two way, it means the Broadlink can't know the motor's operating status, like open or close, up or down. A new revolutionary smart home hub-WIFI bridge will work with our iSmart Window system, those have built in 433 MHz RF receiver. It can integrate with the Amazon Alexa, Google Home and IFTTT, etc. through the Connector App, the communications between the WIFI Bridge and the motor are two-way, and we can know the status of the motor's operation from the app. It's very easy to set up and simple to use. The downside of this WIFI Bridge compared to Broadlink is it works only with our iSmarwindow system or Dooya motorised curtain, roller blind and shutter, etc. Those devices contain a built-in 433 MHz RF receiver or Wifi Curtain motor like iSW DT72TV/W etc. Please note: Follow the success of DD7002B integrate with Amazon Alexa and IFTTT, WiFi Bridge DD7002B can integrate with Google Home (on 07/10/2018) and Samsung's SmartThings now. The DD7002B WiFi Bridge can control Max. 30 motors, Max. 20 scenes. Max. 20 timers, and 20 rooms. There is an RS-485 (RJ9) interface, which offers an additional integration option into third-party home automation systems. If you combine this wifi bridge with our new Bi-directional iSW25LE/S Li-ion rechargeable battery-powered tubular motor or iSW72LE/S Li-ion rechargeable battery-powered curtain motor, then you can not only control the motorised roller blind by percentage, but also you can know the motorised roller blind's latest position status, and you will know the Li-ion battery power status as well. https://www.youtube.com/channel/UCC9DqyPYomoDOmmxOE5iB5w https://www.youtube.com/watch?v=vAQygKZtNcQ To integrate with 3rd party Home Automation systems such as Control 4, Crestron, Elan, URC, etc., please download the attached files from the links below. Please Note: Since we don't have any stock of DD7002B wifi bridge, there is an alternative option, it's our latest DD7006 P Box, which is an updated version of DD7002 B. You can use the POE to power it, and then it can connect to your home network directly through POE, no hassle to connect your home wifi network like DD7002B. Or you can use a Type-C USB to power the DD7006 P box, then use the Ethernet cable to connect to the home network, so it's more convenient to use.